Waterproof Compression Packing Cube – 34.5 × 36 × 14 cm with Air Valve and Clear Window, SL-P1166
Product Description
Product Detail
Square welded TPU compression cube for backpacks, duffels and suitcases: 34.5 × 36 × 14 cm, about 15 L, a full-width waterproof top zipper, a one-way purge valve and a clear window at the front base.
- Model
- SL-P1166
- Product type
- Waterproof compression packing cube
- Size (L × H × W)
- 34.5 × 36 × 14 cm
- Packing capacity
- approx. 15 L
- Weight
- approx. 0.18 kg
- Body material
- TPU-coated nylon, matte
- Construction
- High-frequency welded seams
- Opening
- Full-width top zipper
- Closure
- Waterproof zipper
- Air release
- One-way purge valve with cap, side base
- Window
- Clear TPU, front base
- Water resistance
- Rain and splash resistant, not submersible
- Compression
- Reduces soft clothing volume by up to about 50%
- Standard colour
- Black
- MOQ
- 300 pcs
- Factories
- Guangdong, China · Ho Chi Minh City, Vietnam
Size and Capacity
| Item | Metric | Imperial |
|---|---|---|
| Outer dimensions (L × H × W) | 34.5 × 36 × 14 cm | 13.6 × 14.2 × 5.5 in |
| Packing capacity | approx. 15 L | approx. 915 cu in |
| Zipper opening | approx. 33 cm, full width | approx. 13 in |
| Compressed thickness (clothing load) | approx. 6–8 cm | approx. 2.4–3.1 in |
| Typical load | 15–20 T-shirts, or 1 down jacket + 1 fleece + base layers | — |
| Weight | approx. 0.18 kg | approx. 0.4 lb |
| Fits | Backpacks from 30 L, duffels, carry-on suitcases | — |
Colours
- Black (standard)
- White (custom)
- Grey (custom)
- Navy (custom)
- Olive (custom)
Body colour Pantone matched on request; window stays clear. MOQ 300 pcs per colour.
Key Features
Square shape for backpacks and duffels
At 34.5 × 36 cm the cube stands upright in the main compartment of a 30 L-plus backpack or fills one end of a duffel. After compression it is about 6–8 cm thick, so two or three cubes stack side by side.
Full-width waterproof top zipper
The zipper runs across the full top edge, so the cube opens wide for packing jackets and rolled clothes. A folded top gusset sits above the zipper and gives it room to close over a full load.
One-way purge valve at the base
The valve sits low on the side panel. Close the zipper and press down from the top: air is pushed out at the bottom and cannot flow back in. A screw cap keeps sand and lint off the valve seat.
Clear window at the front base
A clear TPU window across the lower front panel shows what is packed at the bottom, so you can tell cubes apart in a full backpack without breaking the compression.
Welded TPU body, no stitch holes
Every seam, including the centre back seam, is high-frequency welded. With no needle holes, the vacuum holds and rain or a spilled drink stays outside.
How to Use
-
Pack upright
Stand the cube up and fill it with rolled or folded clothes, heaviest at the bottom.
-
Close the zipper
Fold the top gusset in and run the zipper to the end stop.
-
Press out air
Open the valve cap and press down from the top or kneel on the cube.
-
Cap and pack
Screw the valve cap on and slide the flat cube into your bag.
Materials and Components
| Part | Material / specification | Note |
|---|---|---|
| Body | TPU-coated nylon, matte | High-frequency welded, centre back seam |
| Closure | Waterproof zipper, full width | Folded top gusset |
| Valve | One-way purge valve with screw cap | Side panel, near base |
| Window | Clear TPU film | Front base, welded in |
| Logo | Printed on front panel | Customizable |
Accessories
| Accessory | Standard / optional | Note |
|---|---|---|
| One-way purge valve with cap | Standard | — |
| Hand pump | Optional | Fits the valve |
| Grab handle or carry loop | Optional | Welded to top edge |
| Set with SL-P1165 | Optional | Cube + flat bag set |
Printing and Logo
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front panel | 1–3 spot colours | up to 20 × 12 cm | +3 days |
| Heat transfer | Front panel | Full colour | up to 20 × 12 cm | +3 days |
| UV digital print | Front or back panel | Full colour | up to 28 × 20 cm | +5 days |
| Welded TPU patch | Front panel | 1–2 colours | up to 10 × 5 cm | +5 days |
| Printed content label | Above window | 1 colour | up to 8 × 3 cm | +2 days |
Packaging
| Item | Standard | Optional |
|---|---|---|
| Unit pack | Folded flat in PE polybag | Colour box, header card, or mixed set |
| Tags and labels | Barcode label, instruction insert | Branded hangtag |
| Pieces per carton | 100 pcs | To customer requirement |
| Carton size | 45 × 38 × 40 cm | — |
| Gross weight per carton | approx. 20 kg | — |
Lead Time by Quantity
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | China and Vietnam lines can run in parallel |
Performance Testing
| Test | Method | Requirement / result |
|---|---|---|
| Air-leak test | Unboxing → vacuum extraction → 24-hour static rest → air-leak determination | No visible re-inflation after 24 h |
| Valve check | One-way flow test on every valve | Air out only, no back-flow |
| Water resistance | Heavy rain and water-jet test, zipper closed | Contents stay dry; not for submersion |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Window bond | Peel test at window seam | No separation |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Compression load | Body weight applied on packed cube, valve open | No seam or valve failure |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
Certifications and Test Reports
- ISO 9001
- BSCI
- SMETA
- Higg
- GRS
- SCAN
| Report / certificate | Scope | Issued by |
|
|---|---|---|---|
| REACH SVHC | Body fabric, window film | [Lab] |
|
| California Proposition 65 | Body, window, valve | [Lab] |
|
| Phthalate-free test | TPU window film | [Lab] |
|
| Design patent | SL-P1166 body |
[Patent office] |
Care
Wipe inside and out with a damp cloth and dry with the zipper open before storing. Keep the zipper and valve seat free of sand and lint. Release the air from down or synthetic insulation between trips rather than storing it compressed.
FAQ
How is this different from the flat SL-P1165?
Same volume, different shape. SL-P1165 is long and flat for lying in a suitcase. SL-P1166 is square, 34.5 × 36 cm, and stands upright in a backpack or the end of a duffel.
Will it fit in my backpack?
Compressed, it is about 34.5 × 36 × 7 cm and fits the main compartment of most backpacks from 30 L. In a 20 L daypack it fits only partly filled.
Why is the valve near the bottom?
You press down from the top when the cube stands on the floor or on a bed. Air moves downward and out through the low valve, and the clothes do not block it.
Will the cube puff up again in my bag?
Not if the zipper is closed to the end stop and the cap is on. The valve lets air out only, and production is sampled with a 24-hour hold test after air removal.
Does compressing reduce weight?
No. It saves space only. A backpack packed with compressed clothing weighs the same as before, so check carry-on weight limits.
Can I put damp clothes in it?
Yes, for the trip home. The welded body keeps moisture away from dry clothes. Empty and air it within a day or two to avoid odour and mildew.
Can it go underwater?
No. It keeps out rain and splashes, but the valve opening means it is not designed for submersion. Use a roll-top dry bag for kayaking or swimming.
Is it hard to open after compression?
Open the valve cap first to let air back in, then unzip. Opening the zipper under vacuum puts strain on the teeth.
Request a Quote
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk