Boat Bag: Which Bags Keep Your Gear Dry on Deck, and Which Don't




A boat is a hard place for a bag. Spray comes over the bow, water sloshes across the deck and collects in the bilge, swimmers climb back aboard dripping, sunscreen and fish slime get on everything, and salt air works its way into every zipper and snap. A bag that is perfectly good on a beach can leave a phone, a wallet or a spare layer soaked by the end of a day on the water.

Most people who go out on boats end up with two or three bags rather than one: an open tote for the things they reach for all day, a sealed dry bag for anything that must stay dry, and sometimes a duffel for an overnight trip. This guide explains what each kind of boat bag is for, what separates a waterproof boat bag from a canvas boat tote, and what to check before buying one, or before ordering them under your own brand. It draws on over 20 years, since 2001, of making welded waterproof bags at our factories in Dongguan, China and Ho Chi Minh City, Vietnam.

Canvas Boat Tote or Waterproof Boat Bag?

The classic boat tote is a heavy cotton canvas bag with an open top, a reinforced base and short handles. It was designed to carry ice and supplies down to the dock, and it is still very good at that: it stands up on its own, holds a lot and is easy to load. What it is not is waterproof. Canvas soaks up water, the seams are stitched, and the top is open, so anything inside gets wet when the bag sits in a puddle on the deck or catches a wave. Wet canvas also takes a long time to dry and can mildew if it is put away damp.

A waterproof boat bag is made from PVC tarpaulin or TPU-laminated fabric, joined by high-frequency welding so there are no needle holes. Spray beads off it, it can stand in water on the deck without wicking it up, and it can be rinsed with a hose and wiped dry. Some keep the open-top tote shape and simply resist water from below and from the sides; others close with a roll-top or a waterproof zipper and keep the contents dry even in heavy spray. If you want the look and handling of a canvas tote with better protection, a TPU-coated canvas tote with a zip top sits between the two.

Canvas wicks up deck water; welded PVC and TPU shed it.

Three Bags for a Day on the Water

The grab tote. An open or zip-top tote that sits by the helm or under a seat and holds what you reach for all day: sunscreen, sunglasses, a hat, a snack, a towel, a water bottle. It should stand up on its own, have a wide opening and have at least one zip pocket for keys and a phone. A welded PVC or TPU tote is ideal here, because it does not mind sitting in water on the deck and it wipes clean after sunscreen and bait.

The dry bag. A roll-top dry bag for anything that must not get wet: a phone you are not using, a wallet, car keys, a camera, a spare warm layer, dry clothes for the drive home. Closed properly, with the top rolled at least three times, a welded roll-top dry bag keeps out spray and survives a brief dunk if it goes over the side. Air trapped inside also helps it float. A clear window or an outside zip pocket saves opening the bag every time you want to check something. Our article on roll-top vs waterproof zipper dry bags explains the two closures.

The duffel. For an overnight trip, a liveaboard weekend or a fishing lodge, a waterproof duffel with an airtight zipper or a roll-top carries clothes and kit, packs into a locker or a cabin bunk, and keeps everything dry when it is wheeled down a wet pontoon or passed across from a tender. Our guide to what size duffel bag you need helps with capacity.

For a phone you want to use on the water, a waterproof phone pouch worn around the neck is safer than a pocket or a tote: our article on whether a waterproof phone pouch is safe for swimming explains what to check. Anglers keeping a catch need a separate insulated bag; see our guide to the fish kill bag.

What to Check in a Boat Bag

The seams. Stitched seams let water in under pressure and wick it along the thread. Welded seams have no holes at all. Look at the base corners in particular, because that is where a bag sitting in deck water leaks first.

The base. A boat bag spends much of its life standing in water or rubbing on non-slip deck surfaces. A flat, welded base that is heavier than the sides keeps the bag upright and resists abrasion. A bag that slumps when half full tips over every time the boat rolls.

The hardware. Salt corrodes ordinary metal zippers, snaps and rings. Moulded plastic zippers, plastic buckles and stainless or plated hardware last much longer. Rinse any zipper with fresh water after a day at sea.

The colour. A bag that goes over the side is easier to find if it is bright. Yellow, orange and red are easier to spot in the water than navy or black; many boaters keep at least one bright dry bag for that reason. If you carry a grab bag of emergency gear, keep it bright, easy to reach and clearly marked.

The size. Space on most boats is tight, and lockers and under-seat storage are smaller than they look. A 20-litre dry bag and a medium tote cover most day trips for two people; larger bags of 60 to 100 litres suit group trips, camping by boat or carrying shared kit. Our article on keeping gear dry while kayaking covers small craft, where space is tighter still.

A grab tote for the day, a dry bag for what must stay dry, a pouch for the phone.

Looking After a Boat Bag

Rinse the bag inside and out with fresh water after every trip on salt water, paying attention to zippers, buckles and roll-top strips, where salt crystals build up. Let it dry fully, open, out of strong sun, before storing it. Store roll-top bags unrolled, so the fold does not set. Wipe off sunscreen promptly; some sunscreens can mark PVC if left to bake in the sun.

Boat Bags in Our Range

Image Model Capacity Dimensions (H × W × D) Weight Construction Use
SL-H052 Waterproof Welded Tote About 30 L 38 × 52 × 16 cm (15.0 × 20.5 × 6.3 in) About 0.5 kg (1.1 lb) 500D PVC or 420D TPU, high-frequency welded; front zip pocket, inner mesh pocket Grab tote for the day; stands in deck water
SL-H054 Waterproof Canvas Tote About 30 L 40 × 53 × 14 cm (15.7 × 20.9 × 5.5 in) About 0.6 kg (1.3 lb) TPU-coated canvas; top zipper, inner zip pocket, back pocket The canvas boat-tote look with a zip top
SL-D693 Dry Bag With Window and Zip Pocket 15 L / 20 L Flat: 53 × 36 cm / 57 × 38 cm (20.9 × 14.2 / 22.4 × 15.0 in) About 0.6 kg (1.3 lb) 500D PVC tarpaulin, high-frequency welded; roll-top; clear window; outside zip pocket; IPX7 Phone, wallet, keys, spare layer; floats when rolled
SL-D022 Dry Boat Bag 100L 100 L (5–80 L on request) About 95 × 38 cm diameter (37.4 × 15.0 in) About 1.4 kg (3.1 lb) PVC tarpaulin, high-frequency welded; roll-top; grey, yellow, black, blue Group trips, camping by boat, shared kit
SL-C230 Nautical Duffel, Airtight Zipper 45 L (60 L on request) 34.5 × 58 × 24.5 cm (13.6 × 22.8 × 9.6 in) About 1.3 kg (2.9 lb) 420D TPU nylon, high-frequency welded; airtight zipper; waterproof inner pocket Overnight and liveaboard trips
SL-A082 / SL-A083 Universal Phone Pouch Phones up to 6.9″ 19 × 10 cm / 20.5 × 12 cm (7.5 × 3.9 / 8.1 × 4.7 in) 55–75 g (1.9–2.6 oz) PVC with ABS dual slide lock; touch-through window; IPX8 Add-on: phone on a lanyard, usable on deck

Browse the full boat bag range, as well as our dry bags and waterproof tote bags.

Boat Bags for Marine Retailers and Brands

Many of the boat bags we make are sold under our customers' names. Our OEM partners in the marine market include West Marine, attwood and Helly Hansen, and the same production lines make bags for chandleries, boat builders who supply a bag with each new boat, charter companies and yacht clubs. A matched set, such as a grab tote, a roll-top dry bag and a phone pouch in one colour, is a simple way for a marine retailer to raise the value of each sale.

Sizes, colours, closures and pockets can all be specified, from a 5-litre dry bag to a 100-litre deck bag. Logos are applied by silk screen, heat transfer or welded patch, so nothing pierces the waterproof shell; boat names and club burgees can be printed too. MOQ is 300 pieces per style for most models (500 for some dry bags), with samples in about 7–15 days and bulk production in about 30–45 days, from China or Vietnam. We also run sewing lines in-house, so a range can include sewn canvas or nylon totes alongside welded waterproof bags. For more on ordering, see our guides to custom beach bags and floating dry bags.

How We Test Boat Bags

Every order passes through IQC on incoming PVC, TPU, canvas, zippers, buckles and webbing, IPQC during welding, sewing and assembly, and OQC on finished bags, with SGS or QIMA third-party inspection available on request. Welded seams are tested for tensile and bonding strength, with attention to the base corners and handle anchors. Handles and straps go through a load test of 1,500+ cycles, and zippers are opened and closed 3,000 times. Because boat bags live in salt air, zippers, buckles and D-rings are tested in salt spray. Fabric is tested for abrasion, and colour fastness and colour difference are checked against the approved sample. IPX7 dry bags are verified with a full water-immersion test of 2+ hours; sealed totes and duffels with a heavy rain and water-jet test.

Frequently Asked Questions

What is a boat bag?

Any bag used to carry gear on a boat. The classic boat tote is open-top canvas; a waterproof boat bag is welded PVC or TPU and keeps out spray and deck water.

Is a canvas boat tote waterproof?

No. Canvas absorbs water, the seams are stitched and the top is open. It is good for carrying supplies to the dock, but use a welded bag or a dry bag for anything that must stay dry.

Will a dry bag float if it falls overboard?

A roll-top dry bag closed with some air inside usually floats with a light load. Do not rely on it to float heavy gear, and clip it to the boat when you can.

What size boat bag do I need?

For a day trip for two, a medium tote and a 20-litre dry bag cover most needs. Use 60 to 100 litres for group trips, camping by boat or shared kit.

What is the MOQ for custom boat bags?

300 pieces per style for most models, 500 for some dry bags. Samples take about 7–15 days and bulk production about 30–45 days.

How much do custom boat bags cost?

The price depends on the size, material, closure, pockets, logo method and quantity. A zip-top or airtight-zip bag costs more than an open tote or a roll-top. Send us your specification and quantity for a quotation.

Can you print our logo or a boat name on the bags?

Yes, by silk screen, heat transfer or welded patch, in Pantone colours, including club burgees and boat names.

Order Boat Bags From the Factory

Tell us who the bags are for, which types you need and your quantity, and we will recommend a set, make samples and plan production in China or Vietnam. Contact us at info@sealock.com.hk or call +86-769-82009361.

Navigation