Fishing Backpack: Tackle Storage, Rod Holders and Keeping It Dry




A fishing backpack has to do more than an ordinary backpack. It carries tackle boxes that are heavy for their size, it needs somewhere to hold a rod while your hands are busy, and it spends its day on wet banks, in boats, on kayaks and sometimes in the river itself. The two kinds of fishing backpack you see most often are built for different anglers: the tackle backpack, a sewn pack with a hard base and racks of tackle trays, for bank and shore fishing; and the waterproof fishing backpack, a welded pack with a sealed main compartment, for wading, kayaks and boats.

This guide explains how the two differ, what to check in each, and which smaller packs, slings and waist packs make sense instead. It is written for anglers choosing a pack and for tackle brands and retailers sourcing one. We have made welded waterproof and sewn bags since 2001, over 20 years, at our factories in Dongguan, China and Ho Chi Minh City, Vietnam.

Tackle Backpack or Waterproof Fishing Backpack?

A tackle backpack is organised around tackle trays. The lower half usually holds three to five standard utility boxes in a padded compartment, often in the common 3600 or 3700 sizes, with a moulded plastic base underneath so the pack can sit on wet ground. Above it are pockets for pliers, line, scents and a phone. It is ideal for bank fishing, piers and jetties, where you walk to a spot, put the pack down and fish from it all day. It is sewn from coated polyester or nylon and resists rain, but it is not waterproof: the seams and zips will let water in if the pack goes into a river or sits in a puddle in the bottom of a boat.

A waterproof fishing backpack is built the other way round. The main compartment is welded TPU with no stitch holes and closes with an airtight or waterproof zipper, so a phone, a camera, a spare layer and fly boxes stay dry if you slip while wading or the pack goes over the side of a kayak. It carries fewer trays and more loose gear, and it is usually lighter and slimmer so it can be worn over waders. Choose by how wet the pack will get: on a dry bank, tray capacity matters most; in the river or on the water, the sealed compartment does.

Tray capacity for the bank; a sealed compartment for the river.

What to Check in a Fishing Backpack

Rod holders. A pair of straps or a sleeve on the side of the pack holds a rod while you walk, tie a knot or land a fish. Look for a holder at the base and a strap or loop higher up, so the rod sits upright and does not swing. On a waterproof pack, the holders should be welded or attached to the harness, not stitched through the sealed compartment.

Tackle storage. Check which tray sizes fit and how many. On a tackle backpack, trays should slide out without unpacking everything else. On a waterproof pack, a removable internal organiser or zipped fly-box pocket keeps small items from collecting in the bottom.

The base. A fishing backpack spends a lot of time on wet rock, mud and boat decks. A moulded or heavily reinforced base keeps the pack upright and stops water wicking in from below. On a welded pack, a thicker base panel welded into the body does the same job.

Tool attachment. Pliers, a line cutter, a net and a fish grip need to be within reach without opening the pack. Look for MOLLE loops, daisy chains, D-rings or retractor mounts on the front and shoulder straps. A magnetic net release is useful for fly anglers.

Comfort and heat. A loaded tackle pack can weigh 8 to 10 kg. Padded shoulder straps, a sternum strap and a back panel with mesh or channels make it bearable over a long walk. Welded waterproof packs do not breathe, so a raised or ventilated back panel matters more on them.

Salt. Saltwater anglers should look for plastic or corrosion-resistant zippers and hardware, and rinse the pack with fresh water after every trip.

Smaller Options: Slings, Waist Packs and Tool Bags

Not every angler needs a full backpack. Fly anglers often prefer a sling pack, which swings round to the front so they can change flies without taking it off, and which sits higher than the water when wading. A waist pack carries the essentials for a short session and leaves the back free; our guide to the waterproof fanny pack covers the protection levels. A larger welded tool or gear bag holds reels, spare spools and waders in the car or boat. If you keep fish, you also need an insulated bag; see our guide to the fish kill bag. For the specific risks of fishing in moving water, our fly fishing wading guide explains how to protect your gear if you slip.

A sling swings to the front so you can change flies without taking it off.

Fishing Packs in Our Range

Image Model Capacity Dimensions (H × W × D) Weight Construction Use
SL-F071 Fly Fishing Sling Pack About 6 L 23 × 29 × 10 cm (9.1 × 11.4 × 3.9 in) 0.7 kg (1.5 lb) TPU-laminated nylon, high-frequency welded; sewn harness; YKK airtight zipper; two pairs of rod-holder straps; IPX7 Wading and fly fishing; swings to the front
SL-E718 15L Waterproof Fishing Backpack 15 L About 45 × 28 × 15 cm (17.7 × 11.0 × 5.9 in) About 0.8 kg (1.8 lb) 420D TPU, high-frequency welded; top airtight zipper; side rod tube; front elastic mesh pocket Streams and small rivers; light day pack
SL-E008-1 24L Waterproof Fishing Backpack 24 L About 50 × 30 × 18 cm (19.7 × 11.8 × 7.1 in) About 1.1 kg (2.4 lb) 840D double-sided TPU, high-frequency welded; waterproof zipper; front tool suspension system; side bottle pocket Full-day trips, kayak and boat fishing
SL-E217B 14L Fishing Shoulder Pack 14 L About 42 × 26 × 14 cm (16.5 × 10.2 × 5.5 in) 0.7 kg (1.5 lb) 840D TPU, high-frequency welded seamless body; airtight waterproof zipper; pull rings and buckles for accessories Single-shoulder carry for stream fishing
SL-F183 Waterproof Fishing Waist Pack About 4.3 L 17 × 30 × 8.5 cm (6.7 × 11.8 × 3.3 in) 0.65 kg (1.4 lb) TPU laminate, high-frequency welded; sealed waterproof zipper; MOLLE and tool straps; IPX6 Short sessions; tools within reach
SL-C036 Waterproof Fishing Gear Bag 28 L 25 × 45 × 30 cm (9.8 × 17.7 × 11.8 in) About 0.8 kg (1.8 lb) TPU nylon, high-frequency welded; waterproof inner pocket Reels, spools and waders in the car or boat

See the full waterproof fishing bag range. For the materials used in these packs, see 420D vs 840D TPU for fishing packs.

Fishing Backpacks for Tackle Brands and Retailers

Fishing is one of our longest-standing markets. Our OEM partners include SIMMS, ORVIS, PENN and AFTCO, and the same lines make packs for tackle brands, fly shops, marine retailers and guide services. We build both kinds of fishing backpack in-house: welded waterproof packs, slings and waist packs on our high-frequency welding lines, and sewn tackle backpacks with moulded bases and tray compartments on our sewing lines, which work to the same standard. A brand can develop a complete fishing range, from a sewn tackle pack for the bank to a welded sling for the river, with one factory.

Tray sizes, rod holders, tool mounts, colours and camo patterns can all be specified, and logos are applied by silk screen, heat transfer, welded patch or embroidery on sewn harnesses. MOQ is 300 pieces per style for most models, 500 for some, with samples in about 7–15 days and bulk production in about 30–45 days, from China or Vietnam. Complex new designs, such as a pack with a moulded base or a magnetic net release, need a longer sampling stage. For the production side, see our OEM fishing backpack supplier guide.

How We Test Fishing Packs

Every order passes through IQC on incoming TPU, fabric, zippers, buckles and webbing, IPQC during welding, sewing and assembly, and OQC on finished packs, with SGS or QIMA third-party inspection available on request. Welded seams are tested for tensile and bonding strength, with attention to the shoulder strap anchors and rod-holder mounts. Straps, handles and tool mounts go through a load test of 1,500+ cycles, and zippers, including airtight zippers, are opened and closed 3,000 times. Because many of these packs are used in salt water, zippers, buckles and D-rings are tested in salt spray. Fabric is tested for abrasion, and colour fastness and colour difference are checked against the approved sample, including on camo prints. IPX7 packs are verified with a full water-immersion test of 2+ hours and IPX6 packs with a heavy rain and water-jet test.

Frequently Asked Questions

What is the difference between a tackle backpack and a fishing backpack?

A tackle backpack is a sewn pack built around tackle trays, with a hard base, for bank fishing. A waterproof fishing backpack has a welded, sealed main compartment for wading, kayaks and boats, and carries fewer trays.

Is a fishing backpack waterproof?

Most tackle backpacks are water-resistant only. A welded pack with an airtight zipper rated IPX7 keeps the main compartment dry if it is briefly submerged.

Do I need a rod holder on a fishing backpack?

It is very useful. It holds the rod upright while you walk, tie knots or land a fish. Look for a base holder and an upper strap.

Backpack, sling or waist pack for fly fishing?

A sling is the most popular for wading because it swings to the front. A backpack carries more for long days; a waist pack suits short sessions.

What is the MOQ for custom fishing backpacks?

300 pieces per style for most models, 500 for some. Samples take about 7–15 days and bulk production about 30–45 days.

How much does a custom fishing backpack cost?

It depends on the construction (sewn or welded), size, closure, tray compartments, rod holders, tool mounts, print and quantity. An airtight-zip welded pack costs more than a sewn tackle pack. Send us your specification for a quotation.

Can you add our logo or a custom camo print?

Yes, by silk screen, heat transfer, welded patch or embroidery on the harness. Custom camo and printed patterns are available; licensed camo patterns need the licence holder's approval.

Develop a Fishing Backpack With Us

Tell us where your customers fish, from the bank, in the river or on the water, and what they carry, and we will recommend the construction and features, make samples and plan production in China or Vietnam. Contact us at info@sealock.com.hk or call +86-769-82009361.

Navigation