USB-C Rechargeable Compression Bag – Electric Vacuum Packing Cube with Built-In Valve Pump, SL-P1082A
Product Description
Product Detail
Travel compression bag with a USB-C rechargeable pump built into the valve. 45 × 30.5 × 13.5 cm, 0.15 kg, waterproof zipper, welded TPU-laminated body. Compresses clothing to about half its volume in seconds, no hand pump needed.
- Model
- SL-P1082A
- Product type
- Electric compression packing cube
- Dimensions
- 45 × 30.5 × 13.5 cm
- Capacity
- approx. 18 L before compression
- Weight
- 0.15 kg
- Material
- TPU-laminated nylon, high-frequency welded
- Closure
- Waterproof zipper
- Pump
- Built into valve, USB-C rechargeable
- Battery
- 1,500 mAh lithium
- Compression time
- approx. 15 seconds
- Water resistance
- Rain and splash; not submersible
- Standard colour
- Black
- Logo
- Customizable
- MOQ
- 300 pcs
- Sample time
- 7–15 days
- Factories
- Guangdong, China · Ho Chi Minh City, Vietnam
Size and Capacity
| Item | Metric | Imperial |
|---|---|---|
| External dimensions (L × W × H), filled | 45 × 30.5 × 13.5 cm | 17.7 × 12 × 5.3 in |
| Capacity before compression | approx. 18 L | approx. 1,100 cu in |
| Thickness after compression | approx. 5–7 cm (depends on contents) | 2–2.8 in |
| Bag weight | 0.15 kg | 5.3 oz |
| Typical load | 4–6 T-shirts, 2 pairs of trousers, underwear and socks; or 1 down jacket and 2 fleeces | |
Pump and Battery
| Item | Specification |
|---|---|
| Pump location | Built into the screw-cap valve |
| Charging port | USB-C, inside the valve under the cap |
| Battery | 1,500 mAh lithium, built in |
| Charging time | approx. 2 hours |
| Compression time per bag | approx. 15 seconds |
| Compressions per charge | approx. 90 |
| Suction | approx. 4,000 Pa |
| Valve seal | Screw cap with gasket, tethered |
Colours
- Black (standard)
- Grey (custom)
- Navy (custom)
- Olive (custom)
Custom colours are Pantone matched on the body. MOQ 300 pcs per colour.
Key Features
Pump built into the valve
The pump sits inside the valve housing, so there is no separate hand pump or electric pump to pack. Unscrew the cap, switch on, and air is drawn out in about 15 seconds.
USB-C charging
The USB-C port sits under the valve cap. Charge from a phone charger, power bank or laptop in about two hours; one charge covers around 90 compressions.
Waterproof zipper, full-length opening
A waterproof zipper runs across the long side, so the bag opens wide and packs flat like a packing cube. The coated zipper also seals well enough to hold the compressed state.
Flat, firm block in the case
After compression, the bag becomes a flat, firm block about 5–7 cm thick that stacks neatly in a suitcase or backpack. Side loops make it easy to pull out.
How to Use
-
Pack flat
Fold or roll clothes and lay them flat. Do not overfill above the zipper line.
-
Close the zipper fully
Run the zipper to the end stop. Any gap lets air back in.
-
Start the pump
Unscrew the valve cap and switch on the pump. Hold the bag flat until it stops shrinking.
-
Cap the valve
Switch off and screw the cap on firmly to hold the vacuum.
Materials and Components
| Part | Material / specification | Note |
|---|---|---|
| Body | TPU-laminated nylon | High-frequency welded edges |
| Zipper | Waterproof coated zipper | Full length |
| Valve | Moulded housing, welded flange | Screw cap with gasket |
| Pump | Micro motor and fan | Inside valve housing |
| Battery | 1,500 mAh lithium | Built in |
| Charging port | USB-C | Under valve cap |
| Side loops | Polyester webbing | Both ends |
Accessories
| Accessory | Standard / optional | Note |
|---|---|---|
| USB-C charging cable | Standard | — |
| Instruction card | Standard | — |
| Storage pouch | Optional | For the empty bag |
| Multi-size sets (S / M / L) | Optional | See SL-P1082 sizes |
Printing and Logo
| Method | Position | Max colours | Print area | Extra lead time |
|---|---|---|---|---|
| Screen print | Front, above zipper | 1–2 spot colours | up to 20 × 6 cm | +3 days |
| Heat transfer | Front | Full colour | up to 20 × 6 cm | +3 days |
| Logo on valve cap | Valve cap | 1 colour, debossed or printed | up to 3 cm diameter | +10 days |
Packaging
| Item | Standard | Optional |
|---|---|---|
| Unit pack | Colour box with cable and instruction card | Custom printed box |
| Pieces per carton | 40 pcs | To customer requirement |
| Carton size | 55 × 40 × 40 cm | — |
| Gross weight per carton | approx. 12 kg | — |
| Shipping note | Contains lithium battery; shipped with UN38.3 and MSDS | — |
Lead Time by Quantity
| Order quantity | Production time | Note |
|---|---|---|
| Sample (1–5 pcs) | 7–15 days | Standard colour with your logo |
| 300–500 pcs | 25 days | After sample approval |
| 501–1,000 pcs | 30 days | After sample approval |
| 1,001–3,000 pcs | 35 days | After sample approval |
| 3,001–10,000 pcs | 45 days | Split shipments available |
| Over 10,000 pcs | To be scheduled | — |
Performance Testing
| Test | Method | Requirement / result |
|---|---|---|
| Vacuum hold | Unboxing → vacuum extraction → 24-hour static rest → air-leak determination | No visible re-inflation after 24 h |
| Pump performance | Time to compress a standard clothing load | approx. 15 seconds |
| Battery cycle | Compressions per full charge | approx. 90 |
| Zipper durability | Open–close fatigue test | 3,000 cycles |
| Weld bond strength | Seam peel and tensile test | Fabric fails before the weld |
| Valve cap seal | Repeated open–close and leak check | Seal intact |
| Water resistance | Rain and splash test, zipper and cap closed | No water ingress |
Production inspection at IQC, IPQC and OQC. Third-party inspection by SGS or QIMA on request.
Certifications and Test Reports
- ISO 9001
- BSCI
- SMETA
- Higg
- GRS
- SCAN
| Report / certificate | Scope | Issued by | |
|---|---|---|---|
| UN38.3 | Lithium battery transport | [Lab] |
|
| MSDS | Lithium battery | [Lab] |
|
| CE / FCC | Pump electronics | [Lab] | |
| RoHS | Electronics and materials | [Lab] | |
| REACH SVHC | Body fabric |
[Lab] |
Care
Keep the valve cap closed when not pumping so dust and lint do not reach the fan. Wipe the bag clean with a damp cloth; do not wash or submerge it, as the pump and battery are built in. Recharge every few months if stored unused.
Related Products
FAQ
Why does the bag puff back up overnight?
Almost always the zipper is not fully closed to its end stop, or the valve cap is loose or has lint on the gasket. Close the zipper completely, wipe the gasket and screw the cap on firmly.
Does compression make my luggage lighter?
No. It reduces volume, not weight. Packing more into the same suitcase can push it over the airline weight limit, so weigh your bag before you fly.
Can I take it on a plane?
The built-in battery is small and well under 100 Wh, which most airlines allow in cabin bags. Rules vary by airline and country, so check before travel. Keep the pump switched off in transit.
How long does the battery last?
About 90 compressions per full charge, enough for a long trip with daily repacking. It recharges in about two hours over USB-C.
Will it crease my clothes?
Compression causes some creasing. Rolling shirts and placing them flat reduces it. For formal wear, compress lightly by stopping the pump early.
Is it safe for down jackets?
Yes for travel. For storage longer than a few weeks, release the vacuum so the down can recover its loft.
The zipper is hard to close when the bag is full. What should I do?
Do not overfill above the zipper line. Press the contents down with one hand while pulling the slider with the other; never force the slider over trapped fabric.
Is it waterproof?
It resists rain and splashes with the zipper and cap closed. It contains a battery and pump, so it must not be submerged or washed.
Request a Quote
Send quantity, colour, logo artwork and packaging requirements. Quotation and sample schedule within one working day.
Email info@sealock.com.hk